SM58 with ULX2 Handheld Transmitter
- Description
- Features
- Specs
- Downloads
- Frequency Versions
Description:
The SM58 on the ULX2 transmitter features the legendary SM58 cardioidPicks up most sound in front of the microphone and some from the sides. It is less susceptible to feedback in high volume environments.
Read moreGo to the glossary dynamic microphoneDynamic mics have a simple, rugged construction and can handle very high sound pressure levels.Read moreGo to the glossary head which gives you excellent sound quality and is tailored for lead and backing vocals.
The ULX2 Wireless Handheld Transmitter offers advanced features and controls including a backlit LCD display showing group, channel and battery fuel guage. It also has frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary and power lockout cabability and can be used continuously for up to 8 hours using 1 x 9v Battery (included).
This transmitter requires the ULXP4 receiver to complete the system.
All Shure wireless transmitter designs allow for interchangeable microphone heads.
Features:
- Power: On/Off Switch, Battery
- LED-Green When ON, Red When Battery Low
- Three-segment Battery Power Icon
- PEAK Icon-Appears When Audio Signal Overloads
- Group/Channel Displays
- SET Button for Saving Settings
- Adjustable Audio Gain Control
- Battery Cover Unscrews to Expose Battery and Gain Control
Specs:
- Effective Range: 100 m (300 ft.) under optimal conditions
- Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary: 25 to 15,000 Hz, ±2 dB
- Transmitter Gain Adjustment Range: 25 dB
- Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
- XLR connector (into 600 ohm load): +3.9 dBV (line), –17 dBV (mic)
- 1/4 inch connector (into 3000 ohm load): –2 dBV
- RF SensitivityThis is how mich signal a microphone produces for a given amount of sound.Read moreGo to the glossary: 1.26 μV for 12 dB SINAD (typical)
- Image Rejection: 80 dB typical
- Spurious Rejection: 75 dB typical
- Ultimate Quieting (reference ±38 kHz deviation) : >105 dB, A-weighted
- System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces.
Read moreGo to the glossary, typical
- Power Requirements: 9V alkaline battery; 8.4 V Nicad optional
- Battery Life: 8 to 9 hours (with 9V alkaline battery)
- Operating Temperature Range: - 20° to 49° C (- 4° to 120° F)
- Overall Dimensions: 228.6 L x 51 mm
- Net Weight: 289 g
- RF Power Output: 30 mW maximum
- Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary: >100 dB, A-weighted
Downloads:
User Guides
Frequency Versions:
| Frequency ranges and power output for the transmitters | ||
| Band | Range | Power Output |
| G3E | 470-506 MHz | 30 mW |
| K2E* | 606-642 MHz | 10 mW |
| M2 | 662-698 MHz | 30 mW |
| Q2 | 748-784 MHz | 30 mW |
| S3 ** | 829-865 MHz | 10 mW |
* Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover.
** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.
Channel 38 switchover information and helpline 01992 703038
Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.
Other Head Options
